3M™ ASJ Facing Tape 2C105, White, 72 mm x 45.7 m, 16 Rolls/Case

SKU: 7100043842

Part #:

3MABR-2C105

UPC:

00051128959978

3M ASJ Facing Tape 2C105 is a 7.5 mil, reinforced tape with a conformable, pressure-sensitive backing that can conform to duct piping systems. It can be used as a closure on traditional all service jacket (ASJ) faced duct piping and as a vapor seal on traditional ASJ-faced duct board and pipe insulation. The backing is made with a white kraft, scrim, and foil laminate that is coated with a cold-weather acrylic adhesive, making it easy to mold around irregular and curved surfaces, with excellent performance in a range of temperatures. This UL723 classified tape is easy to install by hand without special tools or application methods. It also maintains its adhesive strength and is puncture, tear, humidity and mold resistant.

Facing meets ASTM C1136, type I, II, III and IV. For a durable, easy application that excels in the most demanding conditions, use 3M ASJ Facing Tape 2C105.

ASJ Facing Tape 2C105

  • Cold weather acrylic adhesive is specifically designed to perform in cold weather conditions
  • Easy to install on site without special tools or application methods
  • Flexible backing conforms well to curved or irregular surfaces
  • Heavy duty liner removes quickly and easily
  • High puncture and tear resistance ensure long life and durability in a variety of applications and environments
  • Mold inhibitor helps maintain adhesive strength and effectiveness
  • White kraft, scrim and foil laminate backing is ideal as a vapor seal on ductboard and pipe insulation

Flexible Backing Conforms to Duct Piping Systems
3M™ ASJ Facing Tape 2C105 is a 7.5 mil, tri-directional reinforced tape that excels in demanding temperature and humidity applications. It is comprised of a kraft/scrim/foil laminated backing coated with a cold weather acrylic adhesive. The backing is flexible and conforms to irregular surfaces and curves. It features excellent performance in a range of temperature applications. Mold inhibiting agents help prevent the build-up of mold in the adhesive caused by humid and damp conditions. 

3M™ ASJ Facing Tape 2C105 is UL 723 Classified (15/10 Flame/Smoke Rating). This facing meets ASTM1136, Type I, II, III and IV.

Recommended Applications

  • Closure system on traditional all service jacket (ASJ) faced duct piping systems
  • Vapor seal on traditional ASJ faced ductboard and pipe insulation

Cold Weather Performance
3M™ ASJ Facing Tape 2C105 is coated with a proprietary, pressure sensitive solvent acrylic adhesive specifically designed for cold weather applications, though this adhesive performs well at normal and high temperatures as well. With a service temperature ranging from -40°F/-40°C to 240°F/116°C, this tape can be applied in a variety of environmental conditions. This adhesive features quick stick at normal temperatures and excellent low temperature performance. Once bonded, it will provide good holding power for extended periods with good aging properties that resist lifting and curling.

Efficient Long-Term Installation
3M™ ASJ Facing Tape 2C105 applies easily to various types of thermal insulation, and is easily installed without special tools or application methods. The ASJ facing is conformable for consistent application even when applied to irregular surfaces or around curves. It is also tri-directionally reinforced, helping ensure that the material stays in place even when subjected to high shear loads.

The Science of Better Adhesion from 3M
Since 1925 when one of the lab assistants invented masking tape, 3M has been applying science to life – developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations. And all of it goes into each of the industrial tapes and adhesives, like 3M™ ASJ Facing Tape 2C105, to help businesses like yours operate faster, better and more efficiently.

For more information about ASJ Facing Tape 2C105, visit the official 3M website.

About JAM Industrial Supply of Ohio

Locally owned and operated in Canton, OH, JAM Industrial Supply, LLC has been a 3M Premier distributor and industrial supplier for over 20 years. With our vast network of vendors, we are able to supply the industry’s best products, information, delivery and prices to our customers.

Additional information

Pieces Per Case 16
Unit of Measure

Case

Product Id

7100043842

Part Number

3MABR-2C105

UPC

00051128959978

Per Case

16

Weight 35.647 lbs
Brand

3M™

Backing (Carrier) Thickness

0.16 mm, 6.5 mil

Length

45.7 m, 50 yd

Width

2.83 in, 72 mm

Tensile Strength

40 lb/in, 70.1 N/100mm

Adhesive Type

Acrylic

Elongation at Break

2%

Product Color

White

Dimensions 13.9 × 13.9 × 12.8 in

3M™ ASJ Facing Tape 2C105, White, 72 mm x 45.7 m, 16 Rolls/Case

$497.12

16

per case

$31.07

/ each

3M™ ASJ Facing Tape 2C105, White, 72 mm x 45.7 m, 16 Rolls/Case

$497.12

|

16

per case

|

$31.07

/ each