Scotch-Brite Multi-Flex Sheets come on a 20 foot perforated roll and works quickly and economically for sealer sanding, denibbing, defuzzing, highlighting and topcoat finishing applications.
The Ultimate Choice for Surface Preparation Hand Finishing
This thin, tough, sharp-cutting non-woven abrasive roll is ultra-flexible and conformable for cleaning or fine finishing. Scotch-Brite™ Multi-Flex Sheet is a good replacement for steel wool and eliminates contaminants.
The ultra-fine grade silicon carbide abrasive mineral is suitable for cleaning and finishing surfaces by hand in woodworking, metalworking, synthetics fabrication, and maintenance operations.
The three grades of Scotch-Brite™ Multi-Flex Sheet offer more aggressive, but not coarser, cutting and highly conformable finishing.
Most Aggressive – High Cut for Paint Prep and Wood
The most aggressive cutting grade is purple and is a highly conformable abrasive with high cut for paint preparation and wood finishes without dumping edges. It works great for scuffing new panels, door jambs and under bonnet areas. It is ideal for scuffing prior to primer and paint for proper mechanical adhesion, for tire clean-up and for cleaning grease, oil and rust from engine and other mechanical parts.
Less Aggressive – For Exceptional Finishes on Wood and Metal
The grey Multi-Flex Sheets are perfect for preparing color coat and simple blending and can be used with 3M™ Prep and Blend Liquid (09308) or degreaser. Use these, as well, for light scuffing of primer and paint.
Least Aggressive – For Cleaning and Fine Finishing
The least aggressive grade is copper and is used for water based paint systems and critical color blending. Use it for light scouring and with 3M™ Prep and Blend Liquid (09308) or degreaser.
For more information about Scotch-Brite Multi-Flex Sheet Roll, visit the official 3M website.
| Pieces Per Case | 4 |
|---|---|
| Unit of Measure | Case |
| Product Id | 7000120922 |
| Part Number | 3MABR-7000120922 |
| UPC | 00051131075214 |
| Weight | 4.9 lbs |
| Brand | Scotch-Brite™ |
| Length | 102 mm, 4 in |
| Width | 203 mm, 8 in |
| Abrasive Material | Aluminum Oxide |
| Application | Cleaning, Finishing, Sanding |
| Equipment - Machines | Hand Sanding |
| Grade | Very Fine |
| Industries | Aerospace, Sealant Corrosion Removal, AOEM, Composite, General Industrial, Marine, Metalworking, MRO, Paint Preparation, Transportation & Heavy Equipment, Woodworking |
| Low Stretch | No |
| Product Color | Gray, Maroon |
| Product Form | Sheet Roll |
| Sub Applications | Blending Corners, Cleaning Internal Diameters, Paint/Lacquer Sanding, Pre-Paint Scuffing, Rust Removal, Sealant Removal, Blending, Contour Finishing, Lacquer Sanding |
| Sub Industries | Adhesives, Cabinetry, Coatings, Custom Woodworking and Millwork, Finish & Repair, Finishing/Polishing, Metal Fabrication, Furniture, Primary Wood and Panel Processing |
| Substrate | Metal, Wood |
| Dimensions | 17.6 × 17.2 × 8.3 in |
